CDD8-WR

1,281.00

The CDD8-WR is a weatherised ultra-compact two-way passive loudspeaker system suitable for outdoor applications where it will be subject to changing environmental conditions, but sheltered from direct exposure to the elements. It features an integrated 8” (200mm) LF/1” (25mm) exit HF Coaxial Differential Dispersion driver which can be easily rotated for horizontal or vertical orientation depending on venue design requirements. Its small size gives no indication of its high output capability. As a stand-alone loudspeaker, it has a multitude of applications and can also be incorporated as an infill loudspeaker in distributed systems using larger CDD models, such as the CDD12-WR and CDD15-WR.

No taxes included

Category:

Description

Features

  • Ultra-compact, CDD™ passive two-way system
  • Coaxial Differential Dispersion™ technology
  • Elegant UPM Formi composite enclosure
  • Outdoor operation when sheltered from direct exposure to elements
  • Operating temperature -20°C to +70°C
  • Environmentally tested to meet IP54
  • User-rotatable coaxial drive unit
  • Vertical and horizontal mounting options
  • Screw-free water and particle resistant grille
  • 8Ω nominal impedance
  • Discreet weatherised mounting accessories
  • Black or white standard colour options

Applications

  • Outdoor Restaurants
  • Bars
  • Hotel Areas
  • Nearfield Systems in Outdoor Stadia
  • Transport Hubs
  • Concourses and Theme Parks

The Coaxial Differential Dispersion technology employed in the CDD8-WR delivers more consistent audience coverage than systems with fixed X° x Y° coverage patterns — projecting relatively more output to the rear of the audience, while having wide horizontal coverage close-up. Its innovative CDD driver achieves ‘point source’ summation of the LF and HF sections — eliminating off-axis variations in frequency response associated with non-coaxial designs. Improving on conventional coaxial designs, which can suffer from high-frequency beaming, the driver features a static waveguide that merges seamlessly with the unique cone shape — maintaining the dispersion pattern out to very high frequencies.

The visually-distinctive enclosure can be used in either horizontal (landscape) or vertical (portrait) orientation, with rotation of the driver easily accomplished by removing the screw-free, protective grille. The curved shape of the enclosure allows it to be surface-mounted close to a wall or ceiling by means of optional wall and ceiling weatherised ackets.

CDD8-WR features a water and particle resistant grille made from zinc plated mild steel with powder coated finish and is suitable for operating temperatures between -20°C to +70°C and environmentally tested to meet IP54 .

Finished in black (RAL9005) or white (RAL9016) as standard.

A full-range, passive two-way system, the CDD8-WR should be used with a compatible controller with appropriate limiter settings to provide system protection. The EQ and limiter functions of a controller such as the Martin Audio DX0.5, DX1.5 or DX2, or a Martin Audio amplifier with onboard DSP will maximise its capabilities

Additional information

Datasheet

https://martin-audio.com/downloads/datasheets/CDD8-WRdatasheet.pdf

Userguide

https://martin-audio.com/downloads/userguides/CDD-User-Guide.pdf

Specification

TYPE Ultra-compact, Coaxial Differential Dispersion passive two-way system
FREQUENCY RESPONSE (5) 70Hz-20kHz ± 3dB
-10dB @ 55Hz
DRIVER LF: 8” (200mm)/2” (50mm) voice coil, long excursion, shared ferrite motor system with HF
HF: 1” (25mm) exit/1.4” (38mm) voice coil, polyimide dome compression driver
RATED POWER (2) 200W AES, 800W peak
SENSITIVITY (8) 94dB
MAXIMUM SPL (9) 117dB continuous, 123dB peak
NOMINAL IMPEDANCE
DISPERSION (-6dB) 110°-80° horizontal, 60° vertical (user-rotatable)
CROSSOVER 2.3kHz passive
ENCLOSURE 14 litre, composite material
FINISH Black or white as standard
PROTECTIVE GRILLE Zinc plated mild steel with powder coated finish and weatherised backing
ENVIRONMENTAL Rated at IP54
CONNECTORS Low profile 13A push-lock, weatherproof input panel cover with cable gland
PIN CONNECTIONS Left to right: Input+, Input -, Link -, Link +
FITTINGS 6 x M6 inserts for wall/ceiling brackets
DIMENSIONS (W) 256mm x (H) 410mm x (D) 252mm
(W) 10.1ins x (H) 16.1ins x (D) 9.9ins
WEIGHT 9.8kg (21.6lbs)