C8.1T

479.00

The C8.1T has been specifically designed for higher ceilings where its high SPL capability and controlled 90° dispersion enable it to provide excellent intelligibility in more reverberant rooms. It features an 8″ (200mm) unit with a carbon fie loaded, polypropylene cone and a 1″ (25mm) horn-loaded dome tweeter mounted side-by-side for optimum dispersion and smooth response off-axis.

No taxes included

Category:

Description

Features

  • Two-way high performance flush mounting ceiling speaker
  • 8″ (200mm) UL94V-0 carbon fie loaded polypropylene cone bass
  • Wide dispersion – 90° conical up to 7kHz
  • High & low impedance operation – transformer included
  • 110dB max SPL @ 1 metre (16 ohm)
  • 125 watt power handling (60W through transformer)
  • Polyswitch and thermal fuse protected
  • Steel backcan
  • UL2043 & UL1480

Applications

  • Fixed installations in ceiling and walls
  • Bars and restaurants

The enclosure is ported to extend the low frequency performance and the 5-point mounting system ensures that installation is fast and secure. Input and link terminals make paralleling units a simple operation and a steel cover plate protects the input connector against fire.

These products comply with UL2043 Fire Tests for Heat & Visible Smoke Release for Discrete Products and their Accessories Installed in Air Handling Spaces.

Listed UL1480 General Signalling Speakers.

SUITABLE FOR USE IN AIR HANDLING SPACES

Additional information

Datasheet

https://martin-audio.com/downloads/datasheets/C8.1Tdatasheet.pdf

Userguide

https://martin-audio.com/downloads/userguides/Ceiling-Series-User-Guide.pdf

Specification

TYPE Ceiling mounted, two-way vented enclosure
FREQUENCY RESPONSE (5) 80Hz-18kHz ± 3dB
-10dB @ 50Hz
DRIVER
  • 8″ (200mm) UL94V-0 PP bass driver
  • 1″ (25mm) dome tweeter
RATED POWER (2) 125W AES, 500W peak
SENSITIVITY (8) 91dB
MAXIMUM SPL (9) 110dB continuous, 116dB peak
NOMINAL IMPEDANCE 16Ω
DISPERSION (-6dB) 90° conical up to 7kHz
CROSSOVER 3kHz passive
ENCLOSURE Steel backcan
FINISH
  • Bezel & grille – white UV resistant (Overpaintable)
  • Backcan – zinc plated
PROTECTIVE GRILLE Perforated steel
CONNECTORS Rising clamp plug and socket
ACCESSORIES (included)
  • 60W 70/100V line transformer
  • Tile rails
  • C bracket
  • Paint mask
  • Cut-out template
VOLTAGE TAPS
  • 100V – 60W, 30W, 15W
  • 70V – 60W, 30W, 15W, 7.5W
DIMENSIONS (OD) 354mm x (D) 258mm
(OD) 13.9ins x (D) 10.2ins
CUT-OUT DIAMETER 308mm (12.14 ins)
WEIGHT 6.7kg (14.8lbs)